Skip to content

Garmin Replacement Plate

$59.99

1 in stock

SKU: GRP Categories: ,

    Garmin Replacement Plate, compatible with all Garmin Edge Series from the 500 to 1030 models

    There are two methods to install the plate:

    How to install the plate with super glue and supplied screws:

    1. ​​Make sure the mount can sit flush against the plastic Garmin backplate. You may need to file off the remaining bits of the tab(s).
    2. Line up the bottom of the mount (flat side) parallel to the serial number/bottom of the Garmin.
    3. Install the self-tapping screws. Do NOT turn the screws more than ¼ turn after the screw heads are flush with the mount. The screws are for aligning the mount before glue.
    4. Remove the screws.
    5. Clean the surface of the backplate with rubbing alcohol or a good solvent.
    6. Sand or scuff the plastic base so the glue or epoxy will adhere to the surface.
    7. ​Apply super glue or epoxy to the outer edge of the Garmin mount and fill the screw holes with glue.
    8. Insert the screws and tighten ¼ turn after the screw heads are flush with the mount.
    9. Let it dry and you’re done!

    How to install the plate with Super Glue / Epoxy only:

    1. Clean the surface of the backplate with rubbing alcohol or a good solvent.
    2. Sand or scuff the plastic base so the glue or epoxy will adhere to the surface.
    3. ​Apply super glue or epoxy to the outer edge of the Garmin mount.
    4. Let it dry and you’re done!

     

    FREE POSTAGE, posted the same or next day from Brisbane.